Produse pentru pompă de solvent (11)

ViscoTec Dispenser 3VMP36 is a volumetric dosing pump of larger volumes for an even and reliable product supply of viscous, structure-sensitive and solids-laden products - with a repeatability of +/- 1 %! Absolutely precise, uniform and reliable dosing of various media and handling of larger volumes. Alternating opening chambers ensure gentle product transport and pulsation-free output. Your advantages: - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - Drive with spur gear motor and optional forced cooling fan - easy programming of quantity and speed - low maintenance, quick disassembly - free inlet possible, as self-priming operation

La formulation d’un produit cosmétique est la clé de sa réussite car elle impacte à la fois son efficacité, sa texture et sa qualité. A partir de votre cahier des charges, nous proposons des prototypes fabriqués à partir d'ingrédients naturels. Chaque essai de formulation est évalué avant de vous être proposé pour avoir vos retours et éléments à optimiser. Lorsque vous validez la formule, nous passons aux tests d’évaluation et de caractérisation du produit avant sa fabrication.

Syntech Poliurea Spray-FR Syntech Polyurea Spray-FR is a 100% solid polyurea, it does not contain VOC and can only be applied by spraying using suitable bi-mixer machines that have flow and temperature control and are capable of reaching pressures greater than 180 bar. Added with additives that improve the self-extinguishing properties. It is of the aromatic type and belongs to the Euroclass B s2 d0 according to the EN 13501-1:2005 standard for concrete and fiber cement and in the RAL 7040 colour. It is characterized by a high degree of elongation and this allows it to be used as a very high performance waterproofing, therefore suitable for tanks, tubs and hydraulic works in general. The great adhesion capacity on different supports, after using primer, allows its use on new or existing structures. The pure polyurea Syntech Poliurea Spray-FR guarantees excellent adhesion to the substrate, giving rise to a continuous membrane, without any joints and extremely resistant: environmentally friendly, VOC FREE extremely resistant to atmospheric agents excellent fire resistance properties no weight loss Excellent resistance to puncture, impact and abrasion Constant performance at temperatures - 30 °C / +130 °C High static and dynamic crack-bridging capacity Gel time 10 sec It does not weigh down the structure It adapts to any geometric shape. SYNTECH POLYUREA SPRAY - FR is particularly used as a waterproofing on concrete or as a protective coating for water containment tanks, primary containment, flooring, purification plants, EPS coating, coating and protection of sheet metal, roofs, wooden balconies and canopies, tanks and swimming pools. All surfaces must be free of contaminants and humidity less than 3%; it must offer a mechanical grip on a solid and non-yielding substrate. Where necessary, we recommend preparation using shot peening, bush hammering, sanding or hydrowashing. Consult personnel for correct preparation of the substrate. It is recommended to use primers from the SYNTECH POLIUREA PRIMER range and contact Azichem technical staff for clarification on the most suitable type to use. SYNTECH POLIUREA SPRAY - FR pure polyurea requires a bimixer system capable of producing pressure over 180 bar and temperatures over 65 C°. Contact Azichem technical staff for clarification on the best gun to use and on the details relating to the air system. Approximately 2.9 kg of SYNTECH POLIUREA SPRAY - FR for each square meter of surface to be covered. Barrel 225 kg [A] - Barrel 205 kg [B] - Kit: 1 Barrel 225 kg [A] + 1 Barrel 205 kg [B]

SOLVENT PAINT of COSMOCHROME is a high quality undercoat for concrete surfaces (concrete columns, concrete floors, walls, ceramic tile roofs etc). It is highly durable against extreme weather conditions and atmosphere pollution. It has strong adhesion, great covering power and extreme hardness PACKAGE:0,75 LT, 10 LT, 2,5 LT COLOR:Black, Cypress Green

Mini solvent pump | reliable filling of small quantities The Mini solvent pump is a high-quality hand pump for small containers such as bottles, canisters and tanks up to about 10 litres. For reliable filling and dosing of solvents and readily flammable liquids. Simple principle - highly effective Mini solvent pump | reliable filling of small quantities The Mini solvent pump is a high-quality hand pump for small containers such as bottles, canisters and tanks up to about 10 litres. For reliable filling and dosing of solvents and readily flammable liquids. Simple principle - highly effective The hand pump works according to the excess pressure principle. An excess pressure is built up in the container with the pump ball, forcing the liquid outward. In this way only the hose, pumping tube and discharge come in contact with the liquid being filled. To ensure safety, a pressure relief valve protects the solvent pump against excessive pressure build-up, for example due to sunshine. Pump capacity approx.:1.8 l/min Connector thread:GL 45

Composition chimique (p/p) Oxyde de calcium (CaO) soluble dans l'eau : 12 % Oxyde de calcium (CaO) complexé à l'acide lignosulfonique : 6 % pH : 2,5 – 2,7 Formule Liquide Emballage Conditionnement de 5, 25, 220 et 1000 litres

MN Propolis Organic Green Propolis Extract is produced with high-quality green propolis, through an extraction process resulting from 30 years of experience and studies. Flavonoids: >7 mg/ml Artepillin-C: >0.5% Dry Extract: 15% Organic Certification: BIO (EOS EU)/USDA (Organic USA)/Orgânico BR One of the characteristics of Green Propolis is having higher indices of phenolic compounds, which are not only concentrated in flavonoids but also encompass a wide range of unique compounds, including some exclusive ones like Artepillin-C. Application: Extracts, Propolis and Honey Blends, and the entire variety of dietary supplements. Production in exclusive formulation/specification: Yes.

Nedex Trockenmittel NANOMOL-C ist eine Mischung aus Calciumoxid, das natürliche Trocknungsmittel und natürliche Bindemittel enthält. Das Produkt ist für einen statischen Wasseradsorptionsprozeß mit sehr niedriger Adsorptionsgeschwindigkeit ausgelegt. Mit einer optimierten Dichte kann es in einem bestimmten Volumen eine sehr gute Wasseradsorptionskapazität erreichen. Es hat keine chemischen Reaktionen mit Aluminium, Stahl, verzinktem Stahl und Kunststoffen. NANOMOL-C ist ein Trockenmittel für Isolierglaseinheiten mit Spezifikationen nach EN 1279:2018. Merkmale: Sehr niedrige Gasdesorptionswerte Sehr hohe Wasseraufnahmekapazität Granulierung ohne gebrochene Partikel und Kein Staubgehalt Verpackung: Kartons (25 kg) Metallfässer (160/170 kg) Big Bags (680 kg) Granulatgrößen: 0,5-0,9 mm (automatische Befüllung) 1,0-1,5 mm (manuelle Befüllung)

DETAILING & PAINT CORRECTION

The Drum pump is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suitable for the withdrawal or decanting of solvents, optionally available with Ex-plug. * Optionally available with Ex - plug * Pump tube equipped with Lutz original hand wheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable * Approved according to ATEX directive 2014/34/EU, category ½

NEDEX Trockenmittel "NANOMOL" ist eine Mischung aus Calciumoxid, das natürliche Trocknungsmittel und natürliche Bindemittel enthält. Das Produkt ist für einen statischen Wasseradsorptionsprozeß mit sehr niedriger Adsorptionsgeschwindigkeit ausgelegt. Mit einer optimierten Dichte kann es in einem bestimmten Volumen eine sehr gute Wasseradsorptionskapazität erreichen. Es hat keine chemischen Reaktionen mit Aluminium, Stahl, verzinktem Stahl und Kunststoffen. NANOMOL hat eine noch höhere Wasseradsorptionskapazität und Delta T im Vergleich zu MULTIMOL. NANOMOL ist ein Trockenmittel für Isolierglaseinheiten mit Spezifikationen nach EN 1279:2018. Merkmale: Sehr niedrige Gasdesorptionswerte Sehr hohe Wasseraufnahmekapazität Granulierung ohne gebrochene Partikel und Kein Staubgehalt Verpackung: Kartons (25 kg) Metallfässer (160/170 kg) Big Bags (680 kg) Granulatgrößen: 0,5-0,9 mm (automatische Befüllung) 1,0-1,5 mm (manuelle Befüllung) 1,4-2,0 mm (manuelle Befüllung)